SafetyPro
  1. Home
  2. Blog
  3. AI regulation mapping: a compliance register that stays current
Blog

AI regulation mapping: a compliance register that stays current

Knowing which regulations apply is only the start. The hard part is proving, clause by clause, that your procedures, permits and inspections meet them, and noticing when a regulation or a document changes. SafetyPro uses AI to do the heavy reading and keeps people in charge of the result.

SafetyPro Team · · 7 min read

Why compliance registers fall behind

Most companies keep a legal register in a spreadsheet. It lists the laws and standards that apply, a status and a review date. What it rarely shows is the link between each clause and the evidence: which procedure, permit, inspection checklist or training programme actually meets that clause. When an auditor asks, the team spends days searching. When a standard is revised, nobody knows which documents are affected. Assessments made last year are still marked compliant after the procedure behind them has changed.

What a good compliance register looks like

  • The full text of each applicable regulation, split into clauses, with versions.
  • A link from every clause to the documents that are meant to meet it.
  • A clause-level assessment that says what is met, what is missing and what needs updating.
  • Gaps that turn into owned actions with deadlines.
  • Alerts when a clause changes, and re-assessment when evidence gets old.
  • Reports an auditor can read.

Building the regulation library

The Regulations module starts with twelve built-in frameworks, including ISO 45001, ISO 14001, ISO 9001, OSHA 29 CFR 1910 and 1926, NFPA, API, IOGP, GCC OHS Regulations and the ADNOC HSE Code of Practice. You can add your own frameworks too. The built-in frameworks are names only: SafetyPro does not ship regulation text, so your team adds the clauses it is entitled to use. There are three ways to do it:

  • Add clauses one by one.
  • Import a CSV file with clause, title and content columns.
  • Paste and AI Parse: paste a whole regulation section and let the platform split it into clauses.

Paste and AI Parse is careful with the source text. If the text has numbered headings, such as 4.1, Article 5, Section 3 or the Arabic heading for "Article", it is split by those headings directly, with no AI involved. Only unstructured text goes to the AI, in parts of up to 12,000 characters, with a limit of 240,000 characters per import. The AI must return the original wording: if it rewrites the text, or leaves out too much of it (less than 60 percent of the source covered), the import is refused. You see a preview table before anything is saved, and clause numbers that already exist are skipped.

When a regulation is revised, Compare Versions lets you paste the new text. Each clause is marked as unchanged, modified, new or removed, with a short change summary and a severity for modified clauses. Numbered texts are compared by their exact wording. For other texts the AI compares them, and the result is rejected if the AI changed the new text or skipped existing clauses. You choose Apply All Changes or Review Later, and removed clauses are marked Superseded only after you confirm that you pasted the complete standard.

AI Scan: mapping your documents to clauses

AI Scan reads the content you already keep in SafetyPro and suggests which clauses each item addresses. It collects inspection templates and their questions, permits and hazards on the current project (up to 20 of each), training programmes, QHSE documents and management of change records. Large libraries are sent in batches.

The AI is instructed to map a document only when the document itself explicitly addresses the clause, never because both are about safety in general. A mapping needs a confidence of at least 80 out of 100, and the server removes anything below that even if the AI returns it. A mapping must also match exactly one clause in your library, and the same document, framework and clause pair is never stored twice. Each mapping gets an initial status: Compliant, Partially Compliant or Non-Compliant.

Clause-by-clause assessment and action plans

From the Regulation Mappings tab, Assess (or Assess All) runs a detailed check of the document against every requirement in the clause. The result lists the requirements that are met, missing or in need of update, a short summary and a confidence score, and updates the mapping status. From the mapping details, Generate Action Plan produces step-by-step remediation. Each step has a priority, estimated effort, a suggested responsible role, a deadline category (Immediate, Within 1 Week, Within 1 Month or Within 3 Months) and a deliverable, plus verification steps for afterwards.

For a separate, evidence-first view, the clause-first gap scan asks the opposite question: for each clause, is there direct evidence? Every match must quote an evidence excerpt from the document, with a confidence of 80 or more. The final status is calculated by the server from the evidence that survives this filter, not taken from the AI: Covered, Partially Covered, Not Covered or Not Enough Evidence. Gap scan results are shown on screen and are not saved.

From gaps to tracked actions

Create Actions turns a gap into a corrective action in the Action Tracker. You can do this for one mapping or in bulk for every Non-Compliant or Partially Compliant mapping that has been assessed. Mappings that already have an action are skipped. Each action starts with the actual finding and the list of gaps, keeps the framework and clause as its reference, carries the AI action plan steps if one was generated, and gets Critical priority for Non-Compliant mappings or High for partial ones. The owner and due date are left for you to set in the tracker, so a person decides who does the work and by when.

Keeping the register current

  • Change alerts: when you edit a clause that has mappings, the AI checks the impact on each mapped document and creates a regulatory change alert. The alert shows the severity, the old and new requirement, the affected documents and remediation steps. If the AI check fails, a basic alert is still created. Alerts move from New to Under Review to Resolved.
  • Stale detection: a mapping is flagged as stale when its document changed after the assessment, when the clause was updated after the assessment, or when the assessment is older than 90 days. Re-assess Stale runs them again in one click.
  • Trend: each assessment day records a snapshot of the compliance rate, and the dashboard charts the latest 30.
  • Reports: a PDF compliance report (which can use your company report template) and a CSV gap analysis export.

Legal register, certificates and permits

Two related registers sit beside the AI mapping. The Legal Register in the QHSE module follows ISO 45001 section 6.1.3. Each requirement has a category, reference, applicability, compliance status, responsible person and next review date, and the register counts reviews due within 30 days and shows overdue days. The Compliance and Expiry Tracking module covers certificates, permits and licences, equipment calibration, tool inspections, safety equipment and third-party certificates. Each record is Valid, Expiring Soon (within 30 days), Expired or Closed, with renewal history and attachments.

On the AI Agents page, the Compliance Monitor agent can be run on demand. It reviews open certificates, legal requirements, statutory inspections, training certificates, active permits, inspections from the last 90 days and overdue actions. It returns a compliance score, critical findings and expiring items, and sends notifications for critical findings.

Safeguards and limits

  • AI statuses are assessments, not certification. Review them before you rely on them in an audit.
  • AI Scan reads the text stored in records, such as titles, descriptions, hazards, controls and checklist questions. It does not read attached files.
  • Your library is only as good as the clause text you load. The built-in frameworks contain no text until you add it.
  • Long texts without numbered headings must be split before import or comparison.
  • Access to the module is controlled by its own view permission.

A practical rollout plan

  1. Pick the two or three frameworks that matter most on your projects and load their clauses.
  2. Run AI Scan, then Assess All on the resulting mappings.
  3. Review the Non-Compliant and Partially Compliant results with the document owners.
  4. Generate action plans for the real gaps and create actions with owners and dates.
  5. Check change alerts and stale mappings monthly, and export the PDF report before each audit.

HSE insights and practical guides

See it on your own projects

Tell us about your sites and we will show you how SafetyPro fits your HSE operations.