The problem: emergency plans that live on paper
Most sites have an emergency response plan. Far fewer can show when it was last reviewed, whether the last drill met its target time, or what happened to the deficiencies it found.
- Plans pass their review date without anyone noticing.
- Drills are run, but the timings are written down from memory afterwards.
- Findings such as a blocked exit or a flat radio battery are noted and then forgotten.
- When a real emergency starts, nobody outside the immediate area knows it is happening.
Good preparedness follows a simple loop: plan, practise, measure, fix, repeat. Timings are captured as events happen, every deficiency becomes an action with an owner, and the whole picture is visible to the people accountable for it.
Plans and scenarios: the governance layer
The Emergency Preparedness module in SafetyPro is organised into eleven tabs: Overview, Plans, Scenarios, Drills, Events, Contacts, Org Chart, Subcontractors, Muster Points, Routes and Resources.
The plan register covers 33 plan types grouped for construction, upstream and downstream work, from Fire Emergency and Confined Space Rescue plans to Well Control, H2S Release and Tank Farm Fire plans. Each plan records a document number, owner, approver, issue date and review date. Plans move through Draft, Under Review, Approved, Issued and Overdue Review, and each plan keeps an approval history and a revision history.
The scenario library comes with 25 ready-made scenarios across construction, upstream and downstream operations. Examples include a suspended worker after a fall, trench collapse, heat stroke, sandstorm, H2S release and blowout. Each scenario sets out triggers, warning signs, immediate actions, the escalation path, the communication path, required roles and equipment, external agencies and a target response time. Many also include numbered response steps, each with an action, a responsible role, a time target and instructions.
Two AI helpers support scenario writing. AI Assist suggests triggers, warning signs, actions and other fields, but it only fills fields that are still empty, so nothing you have written is overwritten. AI Generate Steps drafts a step-by-step response procedure that you can then edit, reorder or remove before saving.
Drill scheduling built on real scenarios
Any scenario can be turned into a drill with one click on Use as Drill. The drill form is then pre-filled with the scenario objective, target response time and required equipment. SafetyPro offers 22 drill types, including fire evacuation, confined space rescue, H2S emergency, ESD activation, mass casualty, night drills and joint drills with subcontractors or authorities.
- Format: Tabletop, Practical or Full-Scale.
- Announced or unannounced.
- Coordinator, evaluator and an observer, for example from the client or an authority.
- Expected participants, target response time in minutes and required equipment.
Drills move through Scheduled, In Progress, Completed and Closed. Scheduled drills whose date has passed are flagged as overdue on the Overview tab.
Live drill execution with a running timeline
When a drill starts, SafetyPro opens a full-screen execution view with a live elapsed-time clock. Quick action buttons log the key milestones as they happen: Alarm Activated, Evacuation Started, Headcount Started, Headcount Complete and All Clear, plus any custom event you name. Each entry is saved with its clock time and elapsed time, so the timeline reflects what actually happened. The coordinator can also record actual participants and notes during the drill.
Evaluation: from findings to tracked actions
Ending the drill opens the completion form. It captures alarm, evacuation start, evacuation complete, headcount complete and all-clear times, an overall score from 0 to 100, the response time in minutes, and 1 to 5 ratings for communication, equipment readiness and leadership. Four narrative fields follow: observations, deficiencies, lessons learned and recommendations.
The AI Suggest button drafts those four narrative fields from the drill context, including the live timeline and anything already typed. Suggestions appear in a separate panel. You insert them one by one or all at once, and inserted text is added after what you wrote, never in place of it. If the AI does not answer within 25 seconds, you simply carry on writing the report yourself.
From the drill report page, Create Action turns a deficiency into a corrective action with a title, priority, due date, owner and category such as Equipment, Training, Procedure or Communication. The action is saved to the same register the central Action Tracker uses, marked with Drill as its source and linked back to the drill. The report itself can be exported, and a published Drill Report template from the Report Template Engine is applied when one exists.
Muster points, evacuation routes and headcount
Muster points are kept as a register with name, location, zone, capacity, optional GPS coordinates and a status of Active, Inactive or Under Review. The tab shows the total capacity of all active points. Evacuation routes link a zone to a muster point, are marked Primary or Secondary, and record an estimated evacuation time, the last inspection date and a status of Active, Blocked or Under Review.
Headcount is measured as time. The Headcount Started and Headcount Complete milestones in the live timeline, and the headcount time on the completion form, show how long accounting for everyone took. SafetyPro does not currently scan or tick off individual workers at a muster point, so the name-by-name roll call still follows your site procedure.
Activating a real emergency
The Overview tab carries an ACTIVATE EMERGENCY button. It records the emergency type (nine types, from fire and medical to process, well control and marine), severity, location, description, affected area and whether there are casualties, whether evacuation is required and whether external support is needed. The same live view used for drills then opens, with the clock running from activation.
While an emergency is active, a red banner showing the type, location and time since activation is pinned to the top of every page of the platform, not only the emergency module. A user can dismiss it in their own browser, but it comes back if the event is updated or a new emergency is declared. To end the event, the responder chooses an outcome (Resolved, Stood Down or Escalated), sets the all-clear time, writes closing notes and can tick Investigation required. SafetyPro calculates the duration. On the server, declaring, updating and clearing a real emergency are written to the audit log. Drills do not create these audit entries.
Readiness you can measure
The Overview tab turns all of this into numbers: emergency plans and how many are overdue for review, drills completed this year, average response time, open drill actions, upcoming drills in the next 30 days and active muster points. The headline readiness score is the average of three parts:
Readiness % = (approved plans % + drills completed this year % + contact score %) / 3
The contact score reaches 100 percent once five or more emergency contacts are recorded. A breakdown panel adds five more views: plan type coverage, drill compliance, contact coverage across 15 contact categories, emergency role coverage in the org chart, and resource readiness. An Overdue Items list collects plans past review, overdue drills, resources past their inspection date and expired training for people in emergency roles.
Supporting tabs keep the details current. The escalation matrix sets who is called immediately and at 5, 15, 30 and 60 minutes for seven emergency types. The org chart assigns emergency roles such as Incident Controller, Fire Warden and Muster Coordinator, and checks each person against their training records, flagging training as expired or expiring within 30 days. Resources are tracked in seven categories, from fire fighting and medical to detection and evacuation, with a status of Ready, Needs Inspection, Expired or Out of Service.
Safeguards and honest limits
- AI content is a draft. It fills empty fields or sits in a panel until a person inserts it, and the person saving the record stays responsible for it.
- Creating and editing emergency records needs the emergency create or edit permission. Users with view access can browse but do not see the create buttons.
- Headcount is timed, not tracked per person.
- The readiness score is a simple, transparent average. Use it to spot trends and gaps, not as a certificate of compliance.
A practical rollout plan
- Register your current plans with their real review dates, so overdue reviews show up straight away.
- Review the 25 built-in scenarios, remove what does not apply and add your site-specific ones.
- Enter muster points, routes, emergency contacts and the escalation matrix.
- Assign emergency roles in the org chart and check the training flags.
- Schedule a year of drills, including at least one unannounced drill, and run them from the live execution view.
- Turn every deficiency into an action and review open drill actions at each HSE meeting.