SafetyPro
  1. Home
  2. Blog
  3. Worker 360: one safety profile for every worker
Blog

Worker 360: one safety profile for every worker

Before a worker starts a high-risk task, a supervisor should be able to answer three questions in seconds: is this person inducted, are their certificates valid, and are they fit for duty? Worker 360 puts the answers on one profile, and shows each viewer only what their role allows.

SafetyPro Team · · 7 min read

The problem: one worker, ten different files

On a typical project, information about a single worker is spread across many places. The induction record sits with the site HSE team. Trade licences and safety certificates sit in a contractor folder. Fitness results sit with the clinic. Gate check-ins sit in an access log, and disciplinary records sit with HR.

When nobody can see these together, gaps appear:

  • A worker is sent to a new project without the project-specific induction.
  • A safety certificate expires and nobody notices until an audit.
  • A worker who is fit only with restrictions is assigned to work at height.
  • Repeated violations on different projects are never connected to the same person.

What good looks like

A good worker profile is built on identity, not on names. Two people can share a name, and one person can be spelled three ways. The profile should link records to one verified worker identity, show the current state of each requirement, and highlight what is expired or missing. Just as important, it must protect medical and HR information. A supervisor needs to know that a worker is fit for duty. They do not need to read the physician's notes.

How Worker 360 works in SafetyPro

Worker 360 is a profile page for each worker in the platform. You open it from a searchable list of workers. The list can be filtered to one project or shown for all projects. Each profile has a header with the worker's photo, trade, nationality, current projects and employers. Sensitive identity data is reduced on the server before it reaches the page: the date of birth is shown only as an age, and an ID number never shows more than its last four characters.

Below the header, the profile shows status badges so problems are visible at a glance:

  • Fitness for duty: the latest linked result, its expiry, and whether restrictions exist.
  • Documents: how many certificates are expired and how many are expiring. A document counts as expiring from 30 days before its expiry date, and the expiry day itself is included.
  • Induction gap: whether the worker is active on a project without a completed induction for that project.
  • Open violations: shown only to users who hold a violations permission.

One rule runs through the whole page: only records linked to the worker's identity are shown. A record that mentions a person by name, without that link, is never matched automatically, and the page says so. No fitness status is ever assumed.

Projects, inductions, certificates and site access

The Projects tab lists the worker's roster entries on each project, with trade, designation, employer, joining and exit dates. It also shows assignment history, including transfers between projects, and the latest site access event, such as a gate check-in with its location and time. For each project, the induction state is worked out from the induction records themselves: Completed ranks above Scheduled or Pending, which rank above Failed.

The Training and Certificates tab shows inductions and three document types: Safety Cert, Trade License and Equipment Cert, each with issue date, expiry date and days left. The list is an allow-list on purpose. Medical documents, insurance papers and other free-text document types never appear on this tab.

These records come from SafetyPro's contractor management module, where each contractor also has a Safety Passport score. It weights document compliance at 25 percent, induction completion at 20 percent, performance evaluations at 25 percent, medical clearances at 15 percent and insurance at 15 percent, and checks a list of nine requirements. A contractor is shown as Suspended only when an administrator sets that status, never from the score alone.

Violations and demerit points

Safety violations are filed against a worker's identity, not a typed name. Each violation follows a fixed workflow: draft, submitted, under review, HSE recommended, approved, closed. Only an administrator can void a record, and a reason is required. The person who records the HSE recommendation cannot also give the final approval. The platform refuses it whatever permissions that person holds, so every approval carries two signatures.

Each violation category carries a fixed number of demerit points, which are recorded against the worker only at final approval. The platform offers a starting set of 16 categories that each company can import and edit. The default bands are 1 to 3 points for minor, 4 to 7 for major and 8 to 10 for critical. Filing can include up to 5 evidence files (JPG, PNG, WebP or PDF, up to 10 MB each) and an optional signature from the worker acknowledging the violation.

On the Violations tab of Worker 360, users with a violations permission see the worker's submitted records and the open count. Drafts are never shown. Point totals, both all-time and for the last 12 months, are visible only to users who hold the disciplinary approval or violations admin permission. A voided award is never counted. The platform records and totals points, but it does not trigger any sanction automatically. That decision stays with your people.

Open = submitted + under review + HSE recommended + approved

Privacy by design: three tiers of medical information

Medical data is where many systems fail. Worker 360 separates it into tiers, and the server checks each grant by exact name. Full Access, wildcard grants and platform administration do not open these tiers.

  1. Tier A, for anyone who can open the profile: the fitness result (Fit, Fit with restrictions, Temporarily unfit, Unfit or Under assessment), its expiry, and only whether restrictions exist, not what they are.
  2. Tier B, only with the dedicated View Fitness Detail permission: the restriction text, the assessment type and date, the expiry, and the status and expiry of the worker's Medical clearance document. The general occupational health view permission does not include it.
  3. Medical rationale, the physician's notes: only for users who hold both View Fitness Detail and Workers View Confidential, only when the company has this feature switched on, and only when the user presses Show medical rationale. Every read is recorded in the audit trail. If the audit record cannot be written, nothing is shown.

Tier B and the medical rationale are read fresh from the server each time and are not kept in the browser. Outside Worker 360, the occupational health records themselves (clinic visits, fitness assessments, drug and alcohol tests and others) are sent only to users with the occupational health view permission.

Confidential HR notes, and what is switched off by default

Worker 360 can also show a Notes tab with confidential HR notes in four categories: general, conduct, performance and attendance. Disciplinary documents appear there only for users with disciplinary approval or violations admin. Witness statements and investigation notes never reach Worker 360. Every view of the notes is recorded, and the tab shows a banner that says so.

To be clear about availability: the Worker 360 profile itself is available to any user granted the Workers View or Workers View Full permission. The confidential Notes tab and the medical rationale are off by default. They can be switched on for a company on request, through the SafetyPro team. Adding new HR notes has its own separate switch, which is also off by default and needs its own approval.

Who sees what: scope by project

The Workers View permission shows workers on the user's own projects. Workers View Full shows workers company-wide. Free-text reasons for ending or transferring an assignment are shown only to company-wide viewers. A tab the user is not allowed to see is removed from the page, rather than shown empty.

A practical rollout plan

  1. Link identities first. Make sure roster entries on each project are linked to one worker identity, because Worker 360 shows only linked records.
  2. Load certificates with expiry dates. Without dates, nothing can be flagged as expiring.
  3. Record inductions per project, so the induction gap badge reflects reality.
  4. Assign permissions deliberately. Give View Fitness Detail only to the occupational health team, and Workers View Confidential only to the few people who need it.
  5. Review your violation categories and points before go-live. Treat the default set as a starting point, not a standard.
  6. Decide with HR and medical leads whether to enable confidential notes and medical rationale, and keep them off until you have.

HSE insights and practical guides

See it on your own projects

Tell us about your sites and we will show you how SafetyPro fits your HSE operations.