SafetyPro
  1. Home
  2. Blog
  3. Leading vs lagging safety indicators: which HSE KPIs to track
Blog

Leading vs lagging safety indicators: which HSE KPIs to track

Lagging indicators tell you what already went wrong. Leading indicators tell you whether the work that prevents incidents is actually happening. A good HSE dashboard needs both.

SafetyPro Team · · 2 min read

Lagging indicators: measuring outcomes

Lagging indicators count harm that has already happened. They are essential for reporting and for comparing performance over time, and clients and regulators often ask for them. The most common are:

  • Lost time injuries (LTI): injuries that stop a person returning to work on the next shift.
  • Lost time injury frequency rate (LTIFR): the number of LTIs per million hours worked.
  • Total recordable incident rate (TRIR): recordable injuries per 200,000 hours worked, the basis used by OSHA in the United States.
  • Severity rate: days lost per set number of hours worked.
  • Fatalities, occupational illnesses, property damage and environmental releases.

How to calculate LTIFR and TRIR

Both rates divide by H, the total hours worked in the period:

LTIFR = LTIs × 1,000,000 ÷ H

TRIR = recordable incidents × 200,000 ÷ H

Example: a project records 2 lost time injuries and 5 recordable incidents in 1,500,000 hours worked:

LTIFR = 2 × 1,000,000 ÷ 1,500,000 = 1.33

TRIR = 5 × 200,000 ÷ 1,500,000 = 0.67

Always state which multiplier you use, because companies and clients differ.

The problem with lagging indicators alone

A low injury rate does not prove that a site is safe. Serious incidents are rare, so a site can go months without an LTI while hazards build up. Targets based only on injury counts can also push people to under-report. That is why lagging indicators should never be the only measure.

Leading indicators: measuring prevention

Leading indicators measure the activities and conditions that prevent incidents. Useful examples include:

  • Planned inspections completed on time.
  • Near misses and hazard observations reported, and how quickly they are closed.
  • Corrective actions closed by their due date, and overdue actions by risk level.
  • Permit to work compliance found in audits.
  • Training and competency completion for the people doing high-risk work.
  • Toolbox talks and safety meetings held, and attendance.
  • Leadership site visits and safety conversations.

Choosing leading indicators that mean something

Count quality, not just quantity. One hundred observations that all say "housekeeping" tell you less than ten that identify real hazards. Link each indicator to a risk you care about, set targets the team can influence and review the trend monthly. If an indicator stops changing behaviour, replace it.

From indicators to prediction

When incidents, inspections, observations, permits and actions sit in one system, the data can be read together. Patterns appear: a contractor with rising overdue actions, an area where near misses cluster, or a type of work that keeps showing up in findings. Spotting those signals early is the real value of leading indicators.

A balanced HSE dashboard

  • Two or three lagging indicators for outcomes, such as LTIFR, TRIR and high-potential incidents.
  • Four to six leading indicators tied to your main risks.
  • Overdue corrective actions by risk level, because open actions are open risks.
  • Trends over twelve months, not only this month.
  • The same definitions across every project, so comparisons are fair.

HSE insights and practical guides

See it on your own projects

Tell us about your sites and we will show you how SafetyPro fits your HSE operations.